The Beauty Of Having A Pi-hole

I've been thinking of setting one up for a while, if I have a home server would I be better off hosting it on that or as a separate device? What are the alternatives to a raspberry pi? They've shot up in price over the years.
- If you have a server running, I wouldn't buy more hardware. They have good example documentation for just such a configuration:
  https://docs.pi-hole.net/docker/
  If your server already has those ports bound (specifically the DNS port 53) you are going to have to get creative; otherwise it'll work well!
  Worst case, a cheapo pi 3 will do the job. At one point I had it running on a pi zero, so hardware requirements are pretty low.
  
  If your using docker and the ports are bound you can just use the network mode host so the container gets it's own ip. It's how I have adguard running on my unraid server
- I personally like it on a dedicated Pi simplly because I don't want DNS to die if i'm doing other server maintenance. the Pi is pretty much set it and forget it.
  But i guerss you might as well try it on your server first and you can always buy a Pi if you find it to be too much of a pain.
- I put it onto my home server and it is working great. I can't tell you about all the options, but it was so easy to start another VM for it that I didn't look at other options too carefully.
- if you've already got something running 24/7, you could just put it there. it doesn't need much for resources.
  pihole does not need it's own box. it can run as a container (docker instructions in the official docs) or in a small vm.
  i have two small vm running dietpi and used that to install pihole. i fully expected to run a few more things on them, that's why i chose dietpi--just have never gotten that far (it's only been like three years now).
- Definitely dont bother with buying a pi if you've got other hardware.
  I have one physical (a 3b I had no use for anymore), and two running as containers. The containers do most of the heavy lifting, since they are so much faster than a pi they respond far faster, but the physical is nice for when I take down the clusters for maintenance (or when I lose power, the clusters shut down after about 3 minutes, the pi will keep going for a while on UPS).
- I have it on my Pi, and it does the job just fine. But if you have a home server with a little more power, do it there instead.
  The last thing you want is your DNS to bottleneck. Never had a problem with my Rasp5, but it all depends on how many other services you try to run.
- I run mine on a Intel N100 based mini PC from Beelink running Proxmox. It's just about the only thing it does at the moment so I've had no concerns about bottlenecking.
  It's much more powerful than a pi and costs a not too dissimilar amount to one after you factor in a case, storage, power supply.
- I run mine in Docker. Three containers: PiHole which resolves using Unbound, and a VPN container for Unbound.
  That being said, if you routinely restart that device, or it crashes because of something else you are doing, it gets annoying real quick.
  A cheap mini-PC running a low wattage n150 is a good thing to have for essential services in docker.
- I run my main pihole on a pi and the backup on a NUC mini pc. Le Potato is a cheap pi alternative.

Don't fall for the trap that they recommend an expensive Pi 5: I am running Pi-hole on a Pi 2 but you can basically run this on obsolete hardware, whether that's a Pi or a PC/laptop
- Can confirm. I have 10 year old pi2 that is dedicated to pi hole and even that is not utilizing all of its 1gb of memory
- I'm running Pi-hole and Pi-VPN on a Zero W (using a Geekworm case w/RJ45). It's not very taxing at all.
  I also run two other Pi-hole instances in my server cluster (one in Docker and one in an LXC container). Mostly just for uptime reasons, so I can take any one of them down at any time to perform maintenance and/or upgrade.
- I run mine on a PI 0. Also use it as a samba disk partition for transferring files.
  
  No performance impacts on regular browsing? I never dared to run a DNS on a wifi only device. Or are you using some kind of Ethernet over USB thing?
- You may even be able to run it on a NAS. My NAS supports docker, which means I can run a pihole on it. I have a Pi 3b as my dedicated primary, but my NAS runs as a backup.

I recommend having two. Otherwise your home internet goes down everytime you update or reboot or it crashes.
- Interesting... And this is not a criticism, simply an observation...
  I've a single Pihole instance running on a RPi 4 and have experienced not a single instance of any of the 3 probs you mention. Except, of course, the very few minutes it takes for a reboot which I can schedule and am aware when it's happening...
  🤷‍♂️
  
  Literally just had my pihole hard crash this weekend due to a bad update to FTL. Apparently they had a major version upgrade and didn't bother to read the notes so I had to do a full OS reinstall.
  Back up your configs people. Had to dig through documentation to find the sqlite file and then parse through it like some sort of animal.
  
  I’d say part of it comes down to what your log level is set at. My pi-hole ran on the pi for like 3-4 years before it destroyed the sd card and crashed. I know some people make immutable filesystems for them etc. If you’re writing to the sd card it’s just a matter of when, not if it will fail.
  
  I didn't have a problem on my Pi-hole for a very long time too. OP has that probably because s/he's using it as a DHCP server as well.
  
  Right, I didn't have any issues running it on a pi for years too. The problems came when I started messing with things. So, really my advice is to help save people from ideas like mine.
  I decided one day to take a bunch of old laptops and create a proxmox cluster out of them. It worked great, but I didn't have a use for them, I was just playing. So, I decided to retire the pi and put the pihole on the cluster. HA for the win!
  I did that and came woke up a few days later to my family complaining that they had no internet. I found the pihole container on a different node and it wouldn't start. Turns out with proxmox you need separate storage for HA to work. I had assumed that it would be similar to jboss clustering which I'm familiar with, and the container would be on all the nodes and only one actice at a time, with some syncing between nodes. Nope.
  What's worse is the container refused to move back to the origional node AND wouldn't start. The pi was stored away at this point so I figured it would be easier to just create a new container, but duh, no internet. Turn off dns settings on the router, bam have internet.
  Eventually set up the old pi again, and it took me a while to figure out what I had done wrong with proxmox. But while I was figuring it out it was nice to have the backup.
  Now I always have two running on different hardware, just in case.
  
  I've a single Pihole instance running on a RPi 4 and have experienced not a single instance of any of the 3 probs you mention. Except, of course, the very few minutes it takes for a reboot which I can schedule and am aware when it's happening...
  Yeah, I believe it can vary depending on how you host it.
  In my experience whenever I brought down the PiHole instance (Docker Compose) I would lose all internet access, which is expected since I’m essentially taking away my devices one and only library, so to mitigate this I spun up PiHole on another device and set that as my secondary (backup) DNS resolver.
  This way I can take a container down, update it and all without losing resolution to the internet.
  
  Raspberry Pies (is that how you pluralize it?), and especially their SD cards are not the most reliable pieces of hardware. I've already had a few die on me.
  As for how annoying outages are, I guess that depends on how many people and services you have on your network relying on a functioning DNS. I am running two pihole instances on separate hardware in a keepalived virtual IP setup, with a replicated configuration. Sounds complicated, but it's really easy.
  It's just nice to be able to reboot or perform maintenance on my pihole knowing it won't impact DNS, and not having to worry about interrupting my girlfriend streaming her Netflix series or whatever. For example, just a couple of weeks ago I converted my bare-metal pihole installation to a dockerized one, which was a couple of hours of work, without any DNS downtime at all.
- Mine never crashed until the latest major update, now it’s down every time I come home. Am mad
  
  Yep, if you have somewhere to put a docker container or VM you can have redundancy.
- honestly don't find it necessary. raspberry OS basically never needs to be rebooted and if you really need planned maintenance you can just use a normal DNS server til you're done.
  
  Right, I never said two raspberry pis, I meant two instances. Like one pi and a container run elsewhere.
- Huh? Typically you have a secondary DNS entry on your router
  
  Secondary DNS is not for redundancy!
  The way secondary DNS works is that a client distributes DNS requests across the primary and secondary DNS servers. So if you have pihole as your primary DNS and, say, 8.8.8.8 as your secondary DNS, you're sending half of your DNS requests to google unfiltered. And if your pihole DNS goes down, half of your DNS queries time out.
  The way to have redundancy with DNS is with a standby server that takes over the IP of the primary server if it goes down. You can do this with keepalived.
  
  And what do you set that secondary DNS entry to? Operating systems may use both, so you need the secondary to point to a pi hole or else you're letting ads through randomly.
  
  I have two piholes - they serve different DHCP ranges (e.g. 1-100 and 101-250), and option 6 references each other.
- Yes especially if you’re using DHCP on Pi-hole
  
  You specifically shouldn’t run two DHCP servers on the same network. It can cause IP conflicts when two servers assign the same address to different devices. Because the device doesn’t care which DHCP server gave it an address; It just listens to whichever one happens to respond first. And each DHCP server will have its own table of reserved/in-use addresses. And if those tables don’t match, IP conflicts can occur.
  Device 1 connects to the network, and requests an IP address. DHCP server 1 checks its table of available addresses, and responds with “your address is 192.168.1.50.” It marks that address as in-use, so it won’t assign it to anything else in the meantime. Device 2 connects to the network, and requests an address. DHCP server 2 checks its table of available addresses (which doesn’t match server 1’s table) and responds with “your address is 192.168.1.50.” Now you have two devices occupying the same IP address, which breaks all kinds of things.
  The largest reason to run two is because DNS queries are split amongst the primary and secondary DNS servers. If you only have a primary pihole, you’ll still occasionally get ads when devices use their secondary DNS servers.
- Adguard Home has been absolutely rock solid for me, and it offers DoT and DoH servers so you can easily connect devices over those protocols if you want to.
  
  I just use their free public option. It's basically as good as pihole. With pihole I still got some ads. I still get some like this.
  
  Great, I recommend having two Adguard Home instances.

66.6% of all traffic is blocked with no functional impact on anything that I do
Okay. I’m convinced.
- Misleading statement. It doesn't block "traffic", it blocks DNS requests... you don't know how much traffic this corresponds to.
  
  Correct. The payload of DNS requests is tiny compared to, say requesting a webpage. So there might not be a huge decrease of bandwidth usage reduction. However, having 66.6% less DNS requests is still a win. The router/gateway doesn't have to work that hard because of the dropped requests.

phrasing
- I'm reasonably certain the name was intentional because of the way it could be phrased.

I played with a pi-hole setup for a bit. It was nice. I got distracted and set up NextDNS. That’s where I am now.
I like I can easily turn it on/off when I just need to do something and no time to fuss with it.
I’ve got a home server, just not fully setup and going yet, but someday…
Any thoughts on why I might do pi-hole over something like NextDNS? I think the cost is roughly $1/mo.
- If that's what you're happy with and works for you, continue.
  Personally, I'm creating an environment in which I'm not dependent on any cloud provider on the front end.
  I do have a cloud backup solution for all my data files on the off chance I lose every single on-site backup and closely-held remote backups (read: not in main building but still on property...).
  Just trying to get away from reliance on the existence of someone else's computer/datacenter...
  🤷‍♂️
  
  Thanks for sharing the reasons for your approach.
  There’s so many ways to accomplish this, such as ad guard or portmaster then add on the drivers for our choices. Finding the balance between privacy and easy of use is tough as it is. Then add in the rest of the family that’s more interested in things “just working”.
- Used pihole for years. Loved it. Made the switch to nextdns a year ago. Not going back to pihole. There is nothing wrong with pihole. I got tired of all the time I spent tinkering with it. But, the biggest win for me…nextdns works when I’m off my home network. So I don’t have to deal with the whole vpn back into my home network for dns thing.

Raspberry Pi 1b > DietPi > Pi-hole > Unbound <3
- I never hear anyone else talk about dietpi, I install that more than raspbian
- I’m running mine in Alpine.
- DietPi looks interesting, especially for a 0W and my older B+ model that's just hanging around doing nothing...

Is it possible to do something like this with a newer router? My wireless-G router is finally dying after 20 years, and if I need to upgrade it'd be nice to wrap it all in one.
- You can do it with any router by manually configuring devices, but one that lets you advertise the PiHole IP as the DHCP DNS option makes it a lot easier.
- OpenWrt with AdGuard Home is one option. Big fan of the former, haven't used the latter
- I haven't installed it direct on my router. I used to have it running in a container on my little proxmox server (aka old PC repurposed). I really liked the interface.
  Then I was practically gifted a really nice Asus router. I flashed merlin-wrt to it and read some guide on how to install a different ad blocker. It's really good whatever it is. I haven't had to touch it in months, and I never see an ad.

I use adguard home in conjunction with NextDNS.
I find adguard a little better in the UI department. Have it in a docker container so it's a set and forget.

Getting an error trying to access this:
https://den.dev/blog/pihole has a security policy called HTTP Strict Transport Security (HSTS), which means that Firefox can only connect to it securely. You can’t add an exception to visit this site.
- Works for me
- Perhaps it's blocked for you.
- Are you getting MITM’ed by your work WiFi or something? You should be able to connect to it securely. If that security handshake is failing for some reason, it’s a red flag that someone is likely mucking with your traffic.
  
  My work's filter tagged the link as "Phishing". Seems suspicious. That said, it works fine on my personal device; got a valid certificate and everything.

Ive I've a pi hole running, but I'm not sure if it's worth the hassle. To me it feels like it breaks more things than it helps.
- If it's websites that are breaking, maybe you are using some really aggressive blocklist. Also, you can use multiple blocklists and assign clients to them however you please.
- I took fell into the 7 million sites blocked trap!
- What issues do you have?

Anyone have recs for a site that I can pick up simple hardware for this purpose. Maybe not a pi but like a nuc? Or a refurbed.
- Take an old PC or laptop out of the box-o-crap, install Ubuntu server, give it a fixed IP address, install pi hole with the one line command from their website, tell your regular PC that the laptop IP is your DNS server.
  This is the easiest way to play around before rolling out to your whole network.
- eBay for NUC. Le potato for a pi alternative.