10mo ago

What product brings a lot more value than its cost to purchase?

160 comments

I can think of a few that have served me well:
A good laser printer: $100 plus a few reams of paper have covered my printing needs for over a decade (and going)
Wool socks for the winter. Makes dropping the thermostat a degree or two much less unpleasant
A good, 100W USB-C PD charger. I've got a few, and they'll charge/power pretty much any of my devices (including laptop).
- 100% laser printer. My Brother laser paid for itself the first time I bought a set of cheap toner for it. I don't understand why people buy/rent inkjet ripoffs.
  
  I spotted one on the curb and thought it was an Epson at first glance. Took another look and saw it was a BW Brother laser the internet nerds are always going on about. I took it inside and dried the water off from the rain that just started, and was ready to take it back out to the curb where I found it whenever I discovered why it was put outside.
  That thing is rock solid.
  My girlfriend insists on having her Canon inkjet for color, and that thing bugs out at least once a month. Her mom's HP has been a nightmare for me to deal with over the time she's had it. This trash Brother has been the best home printer and scanner I've had in my near 30 years of computing. It's still going on the toner it came with, not that I print much. Any wifi issues have not been related to the printer. It prints and scans great. From what I understand, third party toner should be no issue when the time comes as there's no chip.
  The hype is real on these Brothers.
- I just had to replace my 15 y/o Samsung laser printer because I couldn’t find toner carts for it anymore. Nor would it work with anything but windows. Last time I found toner about 3 years ago I bought the last two the website had and they finally ran dry and no matter how much I shook them gaps were present. Laser printing is the best.

Almost any repair tools, gardening, or anything NEEDED to DIY. You can do a lot of personal projects with very little money.
That being said, it's very easy to fall into a trap of going beyond what is needed into a full, fancy workshop, with all the shiny new equipment. If that's what you're goal is, that's fine. If you're doing it to save money, there's a lot of ways to just get the bare minimum, and be extremely effective. Especially if you can get used, or even non-functional equipment and fix it up yourself.
- Why you gotta at me like that for any hobby I start getting into.
  
  It's a tough balancing act. You don't want to dive all in and buy the nicest, fanciest, most expensive equipment right out. But also, if you buy too cheap, or too limiting, you're going to get discouraged.
  Used is a really good balance between the two. Plan it out, figure out what you need, and meet someone locally to pick up their old stuff. Usually, if they're selling their starter equipment to upgrade, you can even chat with them about the hobby, and get some real good local advice. Maybe even and in with the local community.
  It really is a win-win.
  
  I had to talk myself out of looking at small backhoes or tractors with a backhoe attachment today…. because I’m thinking about installing a single French drain. My “land” is 50’x100’, in a city.
  Going big instead of being reasonable is a very real affliction that affects way more people than you realize.
- Buy your first whatsit as cheap as possible, if you break it, replace it with another cheap one, if you break that one too, go buy a nice one.
  
  So much this.
  If I know I only need a tool once or twice, I always buy Harbor-Freight (discount power tools if you're not familiar with them). I've always been able to complete the job with it, and anything beyond that is just bonus IMO (versus renting a better tool for the job at equal or greater cost).
  Normally, though, they last a lot longer than that. I bought a HF drill in like 2004 and it finally died last year and was used pretty heavily throughout its life. Pretty sure I got my $18 worth.
- They always sale descent mechanics tool sets for like $100 on black Friday and sometimes other times from home depot or Lowes.
  That and youtube will pay for itself the first time you need to do an easy diy job on your car.
  Why pay a shop $300 dollars to replace a thermostat when you can do it for a $15 part and $20 of radiator fluid yourself?
  $30 set of jack stands and you'll never have to pay a shop $400 again to replace your front brakes. Good brake pads are $50.
  Spark plugs need replaced? $200 at a shop for a 4 cylinder car, or do it yourself in under an hour for $35 worth of spark plugs.
  There's tons of vehicle stuff that's not very hard to do that will save you tons of money with a set of tools and the ability to learn. I drive 15+ year old vehicles and have only taken one to a shop twice in the past 20 years. I do stuff a lot more advanced than your average person probably wants to try to do themselves, but I like working on my own stuff. But most of what I do is easy enough for most people to do without being too difficult.

Anything you purchase to put between you and the ground. Shoes, tires, beds, furniture, foundations
- That was my grandfather's advice as well and he survived the Soviet Union

An old, ugly bike and a good bike lock. No one will ever steal it and can bring you wherever you want without the fear of leaving it in the wrong spot
- Well now I want an old ugly bike. Where do you park yours? 😉
- Isn't that the point of the good bike lock? To prevent stealing even a good, new bike?
  
  They don't make bike locks good enough to stop an angle grinder
  
  If it's a good bike, then someone might put in the effort to steal it. If it's crap, they are more likely to steal the lock.
  
  locks don't keep people from stealing, they only slow them.
  
  Battery operated angle grinders have removed the effectiveness of just about any lock. The idea is to be a less attractive target. Will someone risk getting beat up or arrested for a beater bike? How about an obviously expensive bike? The effort and potential punishment is the same, but one has a much high potential for reward. Even if they don't take the whole bike, do you have expensive rims, etc?
  A bike not worth stealing can still be all you need it to be, but not what someone else would take a risk for.
- I recently purchased a good lock because I got myself an escooter and figured I'd need something good to protect it well. I am still in shock by how much those locks cost, like holy I understand why but I just never expected it. Didn't help that I forgot to check the price before taking it to the counter either I guess.
  I still get anxious about parking my e-scooter though so I try to only bring it to places with secure areas or where I can fold it up and keep it with me.
  
  I bought an e-bike worth a long penny and an u-lock to match, and the bike got stolen from the front of a busy shopping centre by guys in a van using portable angle grinders. Conveniently the security cameras were not in operation due to a system malfunction. I was inside the centre for about 10 minutes, so a real bummer. Thankfully I had also taken an anti-theft insurance that covered the out of pocket cost of my insurance, so mostly this was an annoyance, but also a valuable lesson.

I have recently needed to travel for work and my duffel bag was a pain in the butt to carry around the airport. All the rolling bags I saw for purchase didn't seem well made and were pretty expensive while somehow not utilizing all of the available overhead space. Even well known brands like swiss gear seems to have critical break points on their luggage. The last trip I made, I noticed that all of the flight crew used the same brand of luggage that looked very well made and was reinforced in all the right areas. So I looked it up and found that their non-commercial line was just as shitty as everything else I was seeing, but their flight crew line was top tier... But only flight crew could buy it. So I found a website that would sell it to me! $240 for a suitcase that looks like it will last my lifetime and fits the exact dimensions of the overhead space saving me $40 per trip to not check the bag (my company doesn't cover checking bags). Return on "investment" is 6 flights or 3 round trips. The brand is Travelpro for anyone wondering. And the site I purchased from is mypilotstore.com. They even sell spare parts such as wheels/bearings or leather handles. Super happy with my purchase!!
- Really wanted to get some of the Travel pro brand. Sadly, despite seeing it all the time with crew, it doesn't meet our size requirements as passengers.
  
  They have different sizes in the latest lineup. Including 3 smaller sizes that fit in the overhead. I got one that's 22x14x9 which is perfect for most domestic flights in the US. But they also have smaller sizes and an international size.

A good quality belt. A cheap belt may last a year or two while a good one lasts decades but doesn't cost 10x as much.
Any sort of micro-mobility device (bikes, scooters, etc. or even costlier electric versions of these) that replaces a regular commute has good ROI over driving or even public transit (unless you're lucky enough to live in a city where it's free).
A big sack of rice. It's kind of insane how many meals you can get out of one of those.
- What I would give to have a Vespa
  
  I want an ebike. but fuck those things are expensive as hell.
  
  Same. Been looking for the past few months because my previous ~18mi round trip daily commute was cut down to about 2 miles, but I'm not paying the price that people want for legit vintage Vespas in my area haha. I could get a whole GROM for that price.
- My wife got me a handmade leather belt shortly after we started dating 10 years ago. I have worn it daily and its still in great shape. About two years ago I finally had to start using the next tighter hole as it has stretched, but theres definitely another 10 years of life still in it

A rice cooker. YMMV but I've probably cut 80% of my food spending since I had a way to cook rice reliable and easily.
- I've never found a rice cooker to be necessary. Just cover the rice with about an inch of water - i.e. the finger trick - bring it to a boil and then cover it and turn it off. The latent heat will cook it perfectly in about 20 minutes without any other thought.
  
  That sounds nice and easy, but i fucked up my rice about a third of the time and it really deterred me from making much. I got a rice cooker 4 years ago, ooooh boy now i make rice at least twice a week. As simple as making rice seems, untill you get it, it just isnt that easy. Plus rice cookers are like 25 dollars. Definitely the most used extra appliance ive ever had.
  
  I don't get it either, and I have tried both. My results in the Zojirushi are middling, and well below what I achieve on my stove. If I need a longer-cooking variety (like brown or black rice) done more quickly, then I use the Rice button on my Instant Pot. The Zojirushi takes minimum 60 minutes on any variety and the results are not as good as what I can do on my stove in 20 minutes. (Plus the Zojirushi has no timer, no status indicator, and no power button. To turn it on you plug it in.)
  
  It's good to have a pot with a heavy, well-sealing lid in this case since rice cooks better under a bit of pressure.
- An small InstantPot does the trick just as well, and you can use it for other stuff as well.
- Could you elaborate? It sounds like you used to fuck the rice up most of the time and have to throw it?
- I'm actually the opposite. We relied heavily on our $25 rice cooker (and it's still nice sometimes) but recently I discovered that stove cooked rice with like actual ingredients in it isn't as difficult as I thought it would be. Total gamechanger and even though I love my plain white rice, it can be really nice to mix it up and do like a Greek or Mexican style rice.

My wallet cried a little when I bought new bike, then I calculated the cost of alternative (car, public transport) and was surprised that even nicer bike is cheaper.
If I count only operating cost of car it will pay off in about 1 - 1.5 years. Public transport is at about 2 years.
Yes I know that I have some infrastructure, and other things that make it possible for me to use it everyday as car.
Also I stay fit and healthy when I don't sit in a car - so this is another value that can't be easily put in monetary perspective.
- If you still own a car, and you don’t drive it to work, call your insurance and have them reclassify your car as “personal use”. It’ll save you on your insurance costs.
  
  That's interesting. I will follow up on this. I do occasionally drive to work when the weather or road conditions are atrocious. More so in the winter months. But it's a sporadic thing now and the car is no longer my main mode of transport.
  
  Lol I don't even have driving licence, I don't need it.
- I did the same math when I bought my bike. How many times do I have to ride it to work to break even on this purchase? And as soon as I hit that threshold I never touched the thing again. Turns out I hate riding a bike.
  
  It doesn't have to be an either/or proposition. You can restrict your riding to only beautiful days when you're feeling good and it'll still make a difference.
  
  What was your issue with bikes? When I got used to it, it is no brainer to pick a bike and get to work.

Potato peeler. Saves so much time over using a knife.
- Swede here. Never have I been to a household that does not have a potato peeler. You use it for everything. Potatoes, carrots, apples, pears, sweet potatoes... Sometimes cucumber if you're making something weird/garnishy. People use knives to peel potatoes‽
  
  Sometimes a household is a more fluid concept than you'd like and not everything in a kitchen moves from one instance of a household to the next. But there's always a knife around and sometimes you just want a potato so you peel with what you got. But then when your household gets more stable you remember what a great time-saver a potato peeler is.
  
  I'm fact, just boil the potatoes with the peel, then pinch it off after boiling. Even faster than all other methods. Also keeps nutrients.
- I actually find that it takes many more stabs to subdue my victims, but maybe I just haven't found a good enough quality potato peeler.
- Why not leave the skin on? It's more nutritious and tastes good
  
  The real question is how to easily and quickly get Styes out.
- Dang, I gotta eat more potatoes.

If you're into miniatures, be it for painting, playing games that use them, or just showing them off, a resin 3D printer. Make Games Workshop and Hasbro pull their hairs out and have fun with a huge amount of stuff you can print!
A nice Elegoo Saturn 2 or Halot Mage printer + 2 liters of resin are enough to print well over 400 miniatures of 28mm-32mm scales. Even if you account the pre and post print work (putting supports, cleaning the print), it quickly becomes cheaper than buying boxes of plastic minis. The learning curve, amount of things to account for before printing and maintenance are all significantly smaller than a filament printer

A lot of comfort things: a good mattress, a bidet, a proper office chair, etc
- Bidet is one of the best responses I've seen here. I've had one for ages for environmental and cost saving reasons, and now I literally can't stand shitting in places without one.
  Big Toilet Paper and American culture have been lying to us for all these years.

Quality cookware.

An eReader. Once you have one you can read for entertainment and knowledge anywhere from free to any budget.
Yes, you can read with pretty much anything with a screen but a nice dedicated device will encourage focused reading.
- On that note, you don’t need to buy books from Amazon, Google, Apple or Kobo. And no I’m not talking about raising the Jolly Roger.
  Project Gutenberg offers public domain books for free to anyone in all the formats. While Overdrive or Libby offers you Books, ~~newspapers~~ magazines, and audiobooks for the low low cost of a free library card. Down side on Libby is wait times for some things. Audiobooks can be worse, upto a month or more for the most popular books.
- My Kindle is definitely my favorite way to read anything without heavy diagrams.
  Fits in a fanny pack, doesn't burn my retinas, battery lasts incredibly long.

Laundry machine, whether at home or laundromat. It’s one household chore that almost nobody does manually in the developed world.
Hot water heater. It’s almost dirt cheap to run, but damn if I don’t love me some hot water.
Refrigeration. Shit is so cheap and ubiquitous, but fucking ice and cold beverages, hell yes.
Cannabis. It’s not free but it’s really not expensive. A little goes a long way these days.
Internet maps and GPS. Usually you don’t have your pay for the maps, or GPS, but somebody has to store and update all that information about places you’ve never been. Also phones and data connections aren’t free. Trips used to take a lot more planning, and getting lost. I think a smart phone is worth its cost for mapping alone. And it also calls people too. And plenty of other amazing stuff.
- Serious question: why is it called a "hot water heater"?
  If anything, it heats cold water to make it hot.
  Why not just "water heater"?
  
  I don’t know. I wanted to say “hot water on tap”, to differentiate from a tea kettle, which is also a water heater. But the prompt was about items you might purchase, and I’ve always called it a hot water heater.
  
  With the missing hyphen, we'd better understand it's for scalding water. It just became less cool to write all the symbols required.
- We moved into a place that had a massive washing machine in a room attached to the garage. We ended up buying a massive dryer to match. It's like having our own laundrette. And since I do my laundry like an animal (no separation, no gentle cycle, now low heat dry) I can get most of my clothes done in two loads.
- Laundry machine
  Unfortunately, unless you pay top dollar for something like a Speed Queen, most brands have become hot garbage and have a near-50% chance of breaking down within the first 3-5 years.
  Samsung has been particularly bad as of late with home appliances of any kind, with many retailers dropping them entirely due to warranty issues and repeated call-backs for repairs.
  Still, to be specific: most models of Speed Queen washers and dryers have a MTBD of 15-30 years. They still see the occasional lemon, sure; who doesn’t? But it’s damn rare with them.
  
  I've been happy with my Electrolux, I want to say it's about 8yrs old now.
  
  The cheapest Speed Queen in 1950 was $100, which is about $1300 in today’s dollars. It looks like Speed queen starts about the same cost now. Now you can get these machines for $500. 1/3 cost for 1/3 quality. So either way it’s roughly $100 per year that’s about $2 per week. Still quite affordable and worth every penny compared to a washboard and basin, wringing, and line drying (and spending 2-4 hours of your time doing laundry every week).
- Speaking of hot water, a few years back I needed to replace the boiler for my home heating, and I learned that there are "indirect fired" hot water tanks that use the boiler to call for heat. I did the math and had one put in.
  I love it because the tank is dead simple, very little to go wrong, no burning and rusting and blowing out the bottom seams.
  And my favorite aspect is that it exercises my boiler all year round, so I know won't have nasty surprises when the winter season starts.

A bidet. You can get a basic one for $30-$40 and there is no need to get anything fancier than that. With the amount of money you save on toilet paper, it will more than pay for itself in the first year.
Additionally, toilet paper will never clean your rusty balloon knot nearly as well as a stream of water. If you got shit on your hand, would you be satisfied with wiping it off with some paper? I hate pooping anywhere else but shit-base-alpha. Whenever I have to poop somewhere and use toilet paper, I feel like a filthy caveman.
- As someone with a hairy butt, I use the same amount of toilet paper for drying. But my ass is WAY cleaner.
- Yes. I love my bidet. I got one after the stupid tp shortage. I still like toilet paper to dry off but yes, parts of me have been much happier since this change.
  Whenever someone balks about the bidet I just ask them if they ever used lotion before, and then I point out that they're using poop as lotion on their butt.

Decent stainless steel 'silverware' that doesn't easily bend will last a lifetime isn't very expensive for a one time purchase, and can be really cheap to pick up used if you aren't too picky.

Cables.
Like, just buy a bunch of USB-C cables; they're cheap. Maybe some HDMI and audio ones. Maybe splurge for the braided ones if you want to be fancy. It saves you from the problem of only having one that works that you have to keep juggling around, or not having one on hand when you need it. Different lengths and colours as well, so you don't have super long ones going all over the place, and can distinguish them at a glance.

Instant Pot

Depends on your hairstyle, but I used to have my hair cut about once a month for $20-25. I bought a set of electric hair clippers for about $30 more than 15 years ago and learned to cut it myself and have saved thousands of dollars. Its a simple men's cut, so it works for me.
An electric razor or a quality safety razor are also possibilities. I used to use the disposable gillette razor cartridges at about $4 per head, which lasted 3-4 weeks (I used them until they hurt to save money). Now I have both a safety razor and an electric razor (I don't need both, the electric was a gift). The safety razor was $45 and and blades are about $0.10. Blades last about a week instead of a month, but it paid for itself in about a year. I experimented with various shaving creams as well, but eventually went back to canned shaving cream because the time spent creating a good lather in alternative forms was annoying and not worth the savings.
The electric razor may or may not pay for itself depending on how much it cost and how often you have to change the head and the cost of cleaning solutions, but I do enjoy having it for a quick shave. It definitely is not as good of a shave though.
- Really depends on a hairstyle - I cut my hair like this for years, but now I realize I looked like a criminal.
  But now my wife does my hair, and she is perfect at that (because it's same stuff on same head every time). So I'm still not paying :)

Cocaine ❤️
/s
- Dildo.

Glasses for my myopic ass. Face I mean.

A 3D Printer and CAD software, especially if you can get around free software.
Break a plastic thingy, why spend $50 on a replacement when you can make one. On no that broke, learn why and make it better.
I’m at the point where I can 3D print small tablet cases, and it’s funny watching the included injection moulded accessories fall apart, while mine is going strong.
It’s not for everyone, and there is a skill gap that’s bigger than most people are comfortable jumping. But if you have the desire/want to learn CAD or 3D printing, it will pay for itself, if you use it right.
- Do you have to model a replacement part all by yourself? Or is it easy to find blueprints online?
  I imagine that if I have to model them myself, they would come out wrong most of the time.
  
  Depends on what it is. There are no "Blueprints" online (as much as I wish there was), but there are repositories of 3D Printable models, like Thingiverse from Ultimaker and Printables from Prusa Research. For example if you wanted a replacement Stylus for your Nintendo DS or 3DS you can download them for free. For really popular things (or things nerds love), you'll find a model
  However as the idiot who made the 3DS stylus, I had to make the models myself with a pair of caliper and dozens of test prints. It takes time and patience but the effort is usually worth it since the next time it much less and reduces the more you make.
  Fusion 360 or Tinker CAD are good starting software, with FreeCAD, or OpenSCAD as alternative. With Blender if you prefer modeling like clay.
  Ender3S1 is a Good Starter printer for cheap, with Bamboo Lab and Prusa being the go to community printers. My preference is Ender and Prusa since there are replacement parts easily available.

Most things I buy, because that's why I buy them. I know you were looking for a different type of answer, but I think it's still important to acknowledge this. There are potential exceptions for some necessities, but still rarely ever buy the bare minimum.
- Economists hate this one simple trick . . .

Dried beans.
CeraVe unscented lotion.
Sunscreen
$100 a month for family membership to yoga studio
My iron skillets, none were over $25. Some are over 25 years old now though.

I think a reverse umbrella. It's a great thing, it won't turn inside out and break in heavy winds, and when you fold it up all the wet side is on the inner side so you don't drip all over the floor, the bus, etc. I love mine and it was only about 20 dollars.
- Reverse umbrellas are the best. Hands down.

Toyota Tacoma. Is literally worth more now than when I bought it. My model has bluetooth but none of the "always on tracking" many vehicles come with after. Subaru Forester. It had a recall for a head gasket something or other that required an entire new engine. Got that done at 115k miles, basically a new car for nothing.
Le Crueset set for about $600 15 years ago. We have cooked hundreds of meals with them. Same with cast iron and stainless copper core pots and pans. Immersion blender (corded) as well. Stove top espresso percolator is so cheap and nice if you aren't a daily espresso drinker. Having that one cup on a rainy afternoon or after dinner is a treat.
If you like grilled/bbq/smoked food, a nice grill will last years if you take care of it. I had a side by side gas and charcoal/wood grill for the last 11 years. Heavy use and lack of replacement parts finally killed it. I could cook full plates for 20+ people off that thing or just a couple of chicken breasts for a quick dinner. I have a pretty cheap but capable gas stainless grill and a santa maria bbq now. They work fine, but not quite as convenient as the all in one.
A really good mattress, solid bed frame, nice pillows, and high thread count cotton sheets are worth every penny. I didn't get all that together until I was middle aged and I really wished I had done it sooner. My back is like "wtf dude, we could have had this the whole time ?!"
If you do any woodworking, 3d printing, making stuff, art etc? Space. A space to do all that it. Wether it is a hobby or cottage industry, you will need dedicated space to make your mess. I've seen people trying to DIY in apartments on youtube and its just so bad. Not to mention dangerous. Fumes, fire, trip hazard, mdf dust, etc. Find a place to house all that nonsense outside of your living space.
And if you make digital art, photoshop, draw, anything that makes you hate a mouse for input. A Wacom tablet screen is worth it. Not an iPad, not a Surface all in one, not some knock off clone from Ali Express...but a crazy expensive Wacom. The regular tablets are okay, but drawing on the screen is almost impossible to come back from. I bought mine in 2009 for $3k and still use it daily.
- cast iron
  And if you are prone to æmenia or are a vegetarian, it will also put extra iron into your food. Conversely, you can also get fish-shaped chunks of cast iron called “lucky fish” that residents of SE Asia throw into their pots to add extra iron during the cooking process.

!buyitforlife@slrpnk.net

Roomba.
- Neato robot vacuum, but same dif.

3D Printer. You'll probably need to learn a bit of 3D modeling to get the most out of it and it is a hobby in its own right... But man, the amount of little bullshit stuff I had to buy from Amazon that now I print for pennies and to the exact specifications that I need. I made a new door shelf for my fridge to hold my coffee carafe, a door stop, a loop for my bedside table to hold cables, bracket to hold my webcam, hydroponics tower, drawer organizers, pegboard hooks, a plate to cover a weird shaped hole in my wall, a bracket to hang a rgb smart bulb behind my monitor, a phone stand, angled smart doorbell mount, broom and mop hanger, board games, and of course attachments for my 3D printer!!
- Hmm... My kia console just broke (literally just the clasp snapped) but to fix it I need a whole console which will cost $400. It's literally just an L shaped piece of plastic that I can glue to the handle mechanism but that L piece went missing. So I took some Legos, glued them into an approximate shape, and then sanded it down to the right dimensions. Console lid now closes, with a fashionable colorful Lego clip lol. If I had a 3d printer...
  
  Haha, that's so smart! Yeah I'm considering printing car accessories, so I bought ASA filament which should stand up to the temperatures in a car and not degrade from the suns UV.

To varying degrees, a book.

Might not be the most popular call, but streaming services.
A) movie tickets are absurdly expensive. Went for the first time in years last year and was shocked by the nearly $60 for an early morning session. Bonus though because the wifey and I were the only two at the screening (spider-verse 2). B) physical formats can cost more than 3-4 streaming services per month for just a single movie, cd, vinyl etc. Sales are still worth keeping an eye out for. C) streaming services promote choice. Your favourite movie isn’t on the service? Watch these similar themed movies. Like this song? Here’s work from similar artists. D) the other high seas streaming service is very viable if you’re discriminated against by living in a particular region or country. Or you simply can’t or don’t want to pay.
There’s definite downsides such as service saturation, the curse of too much choice, or constant garbage with the odd diamond thrown in. But if you’re not too concerned with loyalty (and you shouldn’t be) or you sail the high seas then that’s not going to be a problem.
- Counterpoint: I recently got a Blu-ray player and honestly it feels like it'd be much cheaper than streaming. Especially for someone who doesn't actually watch that much.
  It feels like you have to have multiple accounts nowadays because everything keeps changing what platform they are on, and pulling things from their platform for one reason or another.
  Take for example: I wanted to watch the "new" Puss in Boots movie (it's really good, would recommend). If I wanted to watch it on Netflix, it'd cost me £11 a month every time I wanted to see it and it'd be limited to 720p. However, buying the Blu-ray cost me £7, and I can watch it whenever I want.
  Sure, if you watch multiple things a month, or latest releases, streaming might make sense. But it's certainly worth looking into whether occasional physical purchases might end up cheaper in the long run.
  
  I’m right there with you! I am sick and tired of what the steaming services have become. I started building my library of DVDs and Blurays and am never looking back.
  
  Check your local library, some have dvds and Blu-ray disks available to borrow.
- Hit up your local thrift stores for used DVDs/Blurays, rip to computer/NAS and install Jellyfin.
  
  I've been NAS-curious for a while. May I ask what your NAS rig is like?
- I personally find tickets worth it. on the right day at the right time I'll pay $12 for two tickets. then I think like $20-30 for popcorn and drinks
  but I also dont go to every single movie, only the ones I'm really excited about
  
  During the pandemic I got a membership to the nearest cinema. It's $10/mo for a screening you can cash in any time, and I guess there are some extra discounts on popcorn and whatever. If you don't use it, it rolls over to the next month. Since on average, a movie I actually want to see on the big screen (most recently Dune 2) comes around every couple of months, it works out because I have 2 tickets by then and my wife and I have a little dinner/movie date.
- Definitely a controversial take. Streaming didn't destroy the cinema for no reason, though.
  As for physical media, I think the industry has realized that they're not winning back the average consumer and have started catering to the nerds, with most presses (in my exposure) including more than just the base movie that you can find on streaming: higher bitrate, extra content/audio tracks to encourage rewatching, and nice packaging are all things that physical producers have done to compete with the convenience and cost advantage of streaming. In my mind, the appeal of the two are so different anymore that I rarely compare the experience of one being better than the other.

LED lighbulbs.
Started getting them way back when those things were quite expensive and they still payed for themselves within 2 years.
You can use bigger more powerful ones to get more light in a room, which makes your home much more pleasant without your electricity bill going through the roof.
And this is just plain bulbs, no extra installation work stuff. If you go into stuff like LED light strips you can surround yourself with light and/or pimp your home to your hearth's content.
There is really is no need to live in a place that turns into an almost cavelike somber environment when the sun goes down.

Vaseline
- Short or tall; thick or thin; Vaseline will get it in.
  
  Vaseline seems too thick to make good lube IMO.
  Does anyone know if you can cut it with an oil to thin it?

Personal hygiene products.

This is highly individual, and I have some expensive products to add....
A good dedicated camera, since I got my first proper camera back in 2017 (a Lumix GX80) I have taken tens of thousands of photos per year.
Last spring I upgraded to a Lumix S5 with few fantastic lenses and it has been awesome, and with my S5 and 100-400mm sigma lens I have goten plenty of great photos.
To me my cameras are in my top three ever best purchases, all the things I have went snd done because I wanted to take photos have more than paid for the money invested, perhaps not in direct money for me, but in inspiration and enjoyment.
I am planning on getting the Sony A7 IV as a complement to my S5 as the A7 IV has much better and faster autofocus, I love my S5 for it's amazing colors, UI and overall performance, but as I often go planespotting I need better and faster autofocus.
Damn, that was a lot of text about cameras....
Time to talk about cars...
I bought my first car last summer after getting my license back in 2022 and living alone without a car for 8 years.
It is a 2021 SEAT Leon FR PHEV hatchback and being able to get to interesting places out in the country to get cool photos have been fantastic and really improved my mental health.
It was very lightly used, and has enough performance for me without being exsessive.
I mostly drive on battery and charge up once a week, since I live in an aparment complex we only have shared charging infrastructure, but since it is a PHEV I can still go far when I need to without worrying about chargers.

A) Any product worth purchasing. B) Are you an advertiser? This is a weird advertising question.
- Am not!

WD-40.

160 comments