Here in the UK, builders & farmers use flatbeds and movers use box trucks - exclusively working vehicles. Pickups are not practical for most jobs.
I enjoyed the basic formula of past Bethesda games and Starfield delivered more of the same plus some cool extras like being able to disable and board/capture spaceships. I don't understand the sentiment that's it's outdated. Modern AAA games are not dramatically different in design to games from 10 years ago in my experience.
It's a GPO 706, which is a classic British bakelite phone from the '60s. I have it hooked up to a SIP trunk through an OBi 100. Right now it can receive calls but not make them because I haven't gotten around to sorting out a pulse-to-tone dialing converter yet.
All I want is more non-flat themes.
That's right.
I've run a TR-004 for the last 5 years haven't had any reliability issues so far. In hardware raid modes, drives are hot swappable but you can't grow the array without wiping it. I'm JBOD mode you need to power off before swapping drives. The main problem I've had is their chipset is only partially supported by smartmontools due to proprietary crap so there is some strange behaviour there.
Oswaldtwistle... Never been there but it sounds like it must be somewhere near Framley.
As an IT technician in a school, I have to repair Chromebooks of many different models on a regular basis, mostly from Dell and Lenovo. I haven't seen one that I would consider durable yet. All of them use butterfly switches that break when a child rips off the keycap, meaning the whole keyboard has to be replaced. It is also common for the brass inserts into which the hinges are screwed to pop out of the plastic on most models due to rough handling. We also had one Lenovo model where almost every device we put into service developed a no power issue due to the same ceramic capacitor going short. Of course, the display panels are just normal panels that crack when struck - that is probably the most common damage we have to deal with.
I do think the sleaze is an integral side to Frank's character that should stay or he would be a lot less interesting. I don't think anything in the article actually demonstrates that they are changing his character despite the headline. If I recall correctly, Off the Record also included the mechanic even though Frank was not the protagonist so perhaps it was never meant to reflect on his character and was just there to reward the player for being kind of gross.
This is nothing new. I was taught about analysing bias etc in news sources during "citizenship" classes 20+ years ago. Before that, it was called PSHE if I remember correctly.
I have fond memories of Kubuntu Feisty Fawn and the whole suite of KDE apps that were around back then. It's nice to see that Amarok got a new release recently after such a long time.
Bomb squad movie where the bombs are wired to Jenga towers.
Shoutout to John Newcombe's live viewdata service, Telstar. Instructions on how to connect from various platforms are on his website. I often dial in with my BBC Micro to catch the latest news headlines.
You can buy a C64 DIN video cable that will put out s-video, composite video, and audio. From there, you will need a converter box to go from s-video or composite to HDMI. There are cheap and crappy converters and there are better expensive ones but the C64's video output is never going to look amazing anyway.
Alternatively, you can skip the converter box and buy an old TV with s-video input instead.
It applies to comments and posts to the extent that they are attributed to you, about you and/or their content is specific enough to render you identifiable. In practical terms, this means that a data controller can in most cases keep the content of your post by anonymising it, which is why when you delete your account it shows "[deleted]" in place of your user name above your old posts. If the content of the deleted posts, even in aggregate, allows me to find out who you are, then you would have grounds to insist that the content be deleted (or sufficiently anonymised).
Source: I was a DPO for 5 years.
I'm not interested in programming for it myself so the way I see it, its desirability very much depends on network effects and whether it gets a big enough user base and software library. I think there is a good chance of that happening but I keep seeing new projects muscling in on the same space like the Foenix computers and the Agon which makes it less likely that any one of them will be a thriving 'platform'.
There is an awesome enhanced DOSKEY with tab completion: http://paulhoule.com/doskey/
I think you've probably found the cheapest you'll get in Europe. When I want genuine obsolete parts from China, I usually go to Utsource rather than eBay or Ali.
Most likely your remarked chips are real 68000s, especially because the package is not used for much else. They often re-mark chips to make them look like they have a higher rating or simply to give the appearance of being new even though they are perfectly good ICs. It sucks, but they can often be used reliably.
Atari ST RAM upgrade
I'm fitting a Marpet 4MB upgrade to my STFM today. What a hassle! PLCC socket hot glued on top of the surface mount MMU, interposer board inside the metal can and further mods needed to disable the onboard RAM.
GOTEK setup for reverse sleeper
My latest project is an XT-class build in a modern looking case (Sergey's Xi 8088) complete with LED fans, window in the side panel, etc.
Normally, I would try to source real floppy drives for a project like this. However, in this case, to make it more modern-looking, I'm going GOTEK+FlashFloppy.
My question is: let's say I want to be able to use most kinds of DOS floppy images, including 5.25", 3.5", double density and high density. If I configure the GOTEK in the BIOS as a 1.44mb drive, would it also accept 720k images? Would it also take 360k or 1.2mb images or would I need a second GOTEK configured as a virtual 5.25" drive to cover all the bases?
Atari ST internal storage?
Does anybody have any experience of trying to fit internal storage into their ST? I'd prefer to have everything all in one unit drawing from the internal PSU if possible. I'm using a 1040 STFM.
I've seen references to a product called Lightning ST which has a wiki page but no indication of whether or where it is for sale.
I've also found this project: https://github.com/agranlund/STBlitter_RevA but no reviews or information from people who have built it.
If you have tried it, what kind of clearance issues did you have? Did you run without shielding? Did you cut parts of the shielding away? How does it fit with other expansions e.g. 4mb RAM?
It's too quiet. Do you feel somebody behind you?
Spooky late night text adventures on my BBC Micro model B, courtesy of [https://zornslemma.github.io/ozmoo.html](Ozmoo for Acorn).