Skip Navigation

3DPrinting @lemmy.world

EmilieEvans @lemmy.ml

7mo ago

Nesting capabilities of slicer (overview)

Short overview of how good the nesting capabilities of various 3D slicer are.

The task is simple: placing as many of these shapes on a 200x300mm printed as possible. Manual (quick and dirty for reference): 6 pcs.

Ranking:

Ultimaker Cura: 7 pcs.
human (me): 6 pcs.
Orca slicer: 5 pcs.
PrusaSlicer & BCN3D stratos: 4 pcs. By switching (for this particular part) from the worst (Prusa) to the best (Cura) slicer the nesting performance improved by a whopping 75%!

Ultimaker Cura:

Prusa:

BCN3D Stratos (forked from an old version of Cura):

OrcaSlicer:

4 comments

Did you turn on Automatic Rotations in Prusaslicer? By default it's left off and just tiles your part when you duplicate it.
- Default settings. Where is the option to rotate it?
  Providing it manually with 90° rotated and using the auto arrange instead of fill bed: 5 pcs. Still not a great result.
  
  There's also a setting for minimum spacing between parts. The default is overly cautious iirc, I'd suggest lowering it and trying again, though I don't expect it to change much