So SBCs are shit now? Anything I can do with my collection of Pis and old routers?

So SBCs are shit now?

Nothing changed, the hardware is the same as before. Your little pi servers are still doing the exact same work they did before. The only variables are prices on SBCs vs used small factor x86s, and the short, short attention span of terminally online hobbyists.

Use whatever you like, no need to race after others' subjective (and often hyperbolic) judgment.

People are shitting on them because the price point for arm sbcs has risen, while the price point for small x86 computers has come down. Also, x86 availability is high and arm sbc availability has become unreliable. They also aren't generally supported nearly as well. If you don't need more power and you already have them on hand there's no reason not to use them.

The price is what happened. A pi 5 costs almost as much as an old used computer.

The only reason SBCs were ever relevant is because of the excellent pricing, which has now been matched by used x86 computers. That and if the SBC had an open-source design/implementation (open schematics on RISC-V)

I have an x86 proxmox setup. I stuck a kill-o-watt on it. Keep your pi setup if it does what you want, and realize that there's someone out there who is jealous of your power bill.

What happened is that people realized what I've been saying since ever - that the RPi and others are a money grab because of all the required accessories while a MiniPC will get you way more power, stable hardware , case, power supply and everything in between for the same price (if you go for second hand). Here is are examples of such posts: https://lemmy.world/comment/5357961 , https://lemmy.world/comment/4696545

For eg. for 100€ you can find an HP Mini with an i5 8th gen + 16GB of ram + 256GB NVME that obviously has a case, a LOT of I/O, PCIe (m2) comes with a power adapter and outperforms a RPi5 in all possible ways. Note that the RPi5 8GB of ram will cost you 80€ + case + power adapter + cable + bullshit adapter + SD card + whatever else money grab - the Pi isn’t just a good option.

Either way, Pis have their use cases however in my opinion it was an overhyped product that sits on the middle of a market:

• They tried to make the Arduino easy by adding an operating system and high level programming languages such as Python. It never made much sense, why would you want to have GPIOs directly on a "computer"? not reasonable at all. Nowadays we're seeing a raise of the ESP32 devices that have 30-40 GPIOs and Wifi for 2$ each. Cheap, easy to develop and deploy and eating away on the Pi's market.
• Another typical use case for a Pi is some low power server, but while it is great in theory then it lacks the CPU performance required for the container-based absurdities people want to run and the I/O sucks. USB wasn't ever a good way to connect to storage, let alone a USB/network shared bus like we had in the past. The new PCIe is questionable (look at the NanoPi M4v2 from 2018) and requires... more adapters;
• Price-wise it doesn't make much sense as well because a second hand x86 will be 10x faster at the same price point... and way more stable with more expansion.

Now it’s all gone x86 and Proxmox

Proxmox isn't a new thing, in fact it is a pile of crap and questionable open-source that people still run because they haven't discovered LXC/LXD yet. Read more here: https://lemmy.world/comment/6507871. FYI you can run LXD on your Pis and get both containers and virtual machines with it in the same way Proxmox people do with x86.

The irony of this comment is that people will shit on me about replacing Proxmox with LXD in the same way they used to when I said that Pis were a money grab and x86 MiniPCs were way better.

I don't understand this post. Whatever you bought then for they're still good for. People's opinions don't make them less useful.

Pi 4's were hard to get there for a while. Pi 5's are expensive. Lot of other SBCs are also expensive, as in not all that much cheaper than a 2-3 generations old low-end x86. That makes them less attractive for special purpose computing, especially among people who have a lot of old hardware lying around.

Any desktop from the last decade can easily host multiple single-household computer services, and it's easier to maintain just one box than a half dozen SBCs, with a half dozen power supplies, a half dozen network connections, etc. Selfhosters often have a 'real' computer running 24/7 for video transcoding or something, so hosting a bunch of minimal-use services on it doesn't even increase the electric bill.

For me, the most interesting aspect of those SBCs was GPIO and access to raw sensor data. In the last few years, 'smart home' technology seems to have really exploded, to where many of the sensors I was interested in 10 years ago are now available with zigbee, bluetooth or even wifi connectivity, so you don't need that GPIO anymore. There are still some specific control applications where, for me, Pi's make sense, but I'm more likely to migrate towards Pi-0 than Pi-5.

SBCs were also an attractive solution for media/home theater displays, as clients for plex/jellyfin/mythtv servers, but modern smart-TVs seem mostly to have built-in clients for most of those. Personally, I'm still happy with kodi running on a pi-4 and a 15 year old dumb TV.

I'm just going to say, I shit on them all along. ARM is relatively expensive, bespoke and difficult to compile for because of that. Anyone can puke out a binary for amd64 that works everywhere. And way, way faster than some sad little SOC. Especially weird is spending $1000 on a clusterboard with CMs that had half of the power of a 5 year old X86 SFF desktop you could pick up for $75 and attach some actual storage to.

Maybe RISC-V will change all that, but I doubt it. Sure hope so though. The price factor has already leaned the right way to make it worthwhile.

huh? What happened? Who's shitting on ARM?

2 - 8 watts of power for a Pi vs 9-150watts for an x86 system. There are definitely use-cases.

I use a Pi for DHCP, DNS with PiHole, Tailscale Subnet Router, Rustdesk server, Vaultwarden, Syncthing (connects to local device shares, rather than run ST on each device), ArchiveBox, and working on instant messaging (maybe SimpleX, not sure yet). It's kind of maxed out.

But all this runs under 8watts (actually it's so low my smart switch doesn't even register the consumption).

A lot of stuff runs great on SBCs, it's just that they're not as smooth to manage as a Proxmox server running containers or VMs. You also need several SBCs to reach the scale of what many do here on selfhosted and once you reach 4+ SBCs the old x86 server starts looking cost effective all of a sudden. The biggest benefit though is the no noise and very low power consumption, which is great for stuff that will be powered on 24/7/365.

Really a mix is ideal, so you can get the benefits of cheap running costs of SBCs and the power and versatility of x86 for the tasks that require it.

I’ve got about 6 xPis scattered round my flat - is there anything worth doing with them or should I just bin them?

Fuck, if you can't figure out what to do with them, give them to me and I will! There's so many fun art projects you can get up to with Pis.

It's about fitness for purpose, IMO.

I recently migrated most of my homelab to Proxmox running on a pair of x86 boxes. I did it because I was cutting the streaming cord, and wanted to build a beefy Plex capability for myself. I also wanted to virtualise my router/firewall with OPNsense.

Once I mastered Proxmox, and truly came to appreciate both the clean separation of services and the rapid prototyping capability it gave me, I migrated a lot of my homelab over.

But, I still use RasPis for a few purposes: Frigate server, second Pi-hole instance, backup Wireguard server. I even have one dedicated to hosting temperature sensors, reed switches, and webcams for our pet lizard's enclosure.

Each has their place for me.

If you're not into the whole Google Home/Alexa/Apple Home echo system, and have Home Assistant already running, you could use them to build a bunch of smart assistants with Open Thread Border Routers.

I was just looking at doing this in my house but the cost of Pis vs used Google Gen2s with Thread Border Routers built in was cost prohibitive for me.

I have a microserver and various pis ( zero w, 2x 3b+ and a pi b)

With the exception of the zero w they are all still in action.

The pi b connects to the pi touchscreen and displays photos from a directory every 5 minutes.

The 2x3bs are running kodi to stream from my server.

The zero w was a camera recording and streaming 24/7 but I stopped it as I wanted to do other stuff with it.

Don't bin them, sell them

Now it’s all gone x86 and Proxmox with everyone shitting on Arm. What happened? What gives?

It's because the price point is really high now. There's nothing wrong with the hardware you have.

A lot of people, myself included, got pissed off at the Pi Foundation during the chip shortage for exclusively shipping boards to business customers who vacuumed up every single one of them faster than any consumer could. You couldn't shake a stick at any Pi for less than 3x MSRP from scalpers, which at that point, you're literally better off grabbing a NUC. They showed their true colors and it left a bad taste in all our mouths, and I will never be buying another Pi.

Really the ARM hate just comes down to ecosystem support. A lot of the SBC's from other Chinese suppliers have mid kernel/OS level support at best, and a limited range of compiled software. For a lot of purposes, going x86 simplifies setup and opens up the software realm so, so much.

They are still good, arm is awesome. i have Pi4 as OpenMediaVault and docker/homeassistant, etc. Friend gave me a Pi2 surprisingly OMV6 installs on it (even though it ia technically not supported), that one became a PiHole. My 13 year old iomega arm NAS just got converted to a debian minidlna server. Uses 20% of the 256MB RAM.

Pine64 makes some cool devices that run on 100% free software.

Man my home server IDLES at 76 watts per hour running x86. Now mind you I need the x86 to perform some of the functions I want. This thing works as an NAS, nextcloud, media server, kiwix, security camera (zoneminder), remote desktop (xrdp), runs home assistant, gpu AI upscaling for photos, and finally screeches along running a virtual pipe organ I built that takes 69 GB of RAM to run.

If I could do that with raspberry pi's I would in a heartbeat! the power savings alone would eventually pay for them. If it's doing what you want then don't worry about them. My pi400 works as a remote desktop client and one day I hope more of this stuff will work well on it/a future generation so I can ditch the tower, energy usage, and noise.

The problems I've had with my RPis have all revolved around the fragility of their SD storage. I got burned one too many times trying to host something important in my house with these things, just for them to get corrupted and lose everything. Backing up these systems was its own nightmare, which failed as much as it succeeded.

Attach a small camera to one of them and attach it to a bird feeder. Set another one up with frigate.

It's a fun use and actually good for the environment.

I have a pi which I use as an apple tv/firestick alternative which works very well and would be pretty pointless with a larger pc imo. Servers I dont do with small PIs but indeed old computers. I think all kinds of ultra movable devices will be good with PI and derivatives.

For folks that want to get into it: pine64 is open source but I havent tried it yet. Thinking of it though. They even have a watch.

Jeff Geerling made the comparison in a video recently. Did not get to finish it yet, but he brought up pros and cons of both, and there are use cases for both ARM and x86. I still use mine even though I have an old dell tower as an x86 server, mainly for netboot.xyz and pivpn, because I can run it with poe. As long as the switch has power those services will be available.

I thought this was about FIFA

If I had all the time I wanted to homelab, I would get me a Nas box and run like 10 pis of different vintages as purpose built servers.

A pi to run PHP, a pi to run mysql, a fleet of pis as docker nodes.

Still got'em all. Pis are 3d printing, running small automation projects, running on solar in my back yard. I have far too many others that I took a hit on, honestly. Acme Arietta G25 is one that I've really only done some hardware dev on. I'll prob be buried with it. I had a Pocket C.H.I.P that was sick, but after the company fell, I ditched it. Omega Onion 2 hasn't seen any electrons since about. Two weeks after I received it. But yeah, five liters of fun...

I missed this sentiment. Just bought my first RPI (5) and it's a neat little toy. I have some pretty specific requirements I'll have to work toward but I like tinkering with it. The size, price and low power consumption beat any of the mini PCs I found. Then again I'm probably out of the loop

Sbcs are neat and raspi is still cool imo, i guess people just started to realise that mini x86s exist too and the recent releases with 6, 8, 12, cores are enticing to a group of people. Really depends on what you want to do, right tool for the right job etc

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

16 acronyms in this thread; the most compressed thread commented on today has 11 acronyms.

[Thread #449 for this sub, first seen 24th Jan 2024, 01:45] [FAQ] [Full list] [Contact] [Source code]

I have a small cluster of Pis running k3s kubernetes and running several services for my household. Yea they could all run on a single beefy server but I had fun learning it all.

If you're not doing stuff with them; not much point.

Since these devices have ARM processors, they can be embedded to places that doesn't need high power and contain smaller volume; unlike PCs. You can host your a Jellyfin server on one, host a pi-hole so that you filter out every internet traffic from ads on another. Maybe a small FTP server that you can use as cloud storage?

I got lost with setting up a nice inbox downloader to store all my emails on a HDD attached to my RPI4, but haven't quite mastered the SMTP server part or found the right software to run on it. It's currently powered off waiting for a reflash of the SD Card so I can try again. The end goal for mine is to set up fetchmail and have it grab from my inboxes then imap capabilities so I can read it in Thunderbird. (Don't talk to me about webmail, I know it's the way but I'm older than Star Wars (Original one) and am stuck in my ways. Now get off of my lawn!

Seriously though, I have tinkered with it before as an AdguardHome Server, but somehow, my latency increased so I dropped that. Most of it's life was spent hosting Home Assistant on it until I moved that to the umm...more controversial Proxmox VM method. I'm also on the fence about setting up the Raspberry Pi Nextcloud on it. (Maybe).

Here is a good resource for 36 different things you could possibly do with yours.

I love my orange pi (5+, 16GB, 256GB eMMC, 2TB NVME). New, with case and eMMC (excluding NVME) was about $200.

Smart switch says it idles at about 2.9W, transcoding 1080p with Jellyfin draws about 5W (at several hundred FPS with HW transcoding --- so it presumably won't draw that much for the entire duration of the media). Not sure how reliable smart switch is at those powers but I'm guessing it's ballpark accurate.

Works flawlessly for Immich of course.

The duel 2.5G NICs are underutilized by me but kinda fun to have I guess.

For me, idle power is important, so the ARM SBC route is pretty appealing. A new x64 NUC at same price might offer comparable performance I suppose, and something used could be beefier at the expense of more power usage. But to each their own!

I am nearly complete migrating my ceph cluster and nomad compute cluster to arm :shrug:

I bought a dozen of pi4 when they were so cheap but i actually dont know what exactly to do with them. I actually would love some ideas