Skip Navigation

If LED bulbs are supposed to last for 10 years, why do I still need to replace them every 9 months?

I'm in a nasty frame of mind right now, and this is what my 'tism brain decided to laser focus on for several hours. I'm mad that my light bulbs cost 10x more than they used to, and don't last any longer, and my power bill is higher than ever.

Yeah yeah, I know, it's probably just capitalism shitting it up on purpose for profit. And bulb science is probably solid, I guess. I'm just pissed off that I just barely managed to scrape through this pay period with $2.78 left in the bank before I default on my mortgage.

Anyway, any lightbulb science comrades got any info?

89 comments
  • It's either the wiring in your house or the light fixtures or both.. If I remember right older light fixtures, like before the last 15 years, don't have the right type of power regulation and it kills LEDs quick. Source: Not an expert just have the same problem in my place.

    • I think with an old light fixture it's more likely a heat dissipation problem than it is the quality of the power. Incandescent light bulbs handled heat just fine (that was their whole point - they heated up until they were white-hot inside) but heat kills LED bulbs.

  • I have no idea what you're doing wrong. All the led bulbs I've got are coming up on ten years old and working fine.

  • Your bulbs might be burning out because of overheating. These bulbs have their powersupply in the bulb screw, so there's no real place for the heat to go. I have a ceiling lamp that causes normal bulbs to reach temperatures as high as 100c, and so they burn out every couple of moths. This might be your issue.
    Edit: fixed misspell

  • You're either buying really shit bulbs or you've got shit power. Probably the latter.

  • The bulbs generally contain around 10 LEDs arranged in series, so if any one of them fails, the bulb no longer works. Also they are generally not cooled well, and the heat leads to faster failures.

    If you have a dead one around, pry it open and you'll likely see some slightly charred or discolored plastic and also one LED with a tiny charred spot.

    Seems like it would be easy enough to mitigate both of those problems with basic design improvements, but cheap design causing early failure is sort of a win/win from the mfg perspective.

  • Pay for on brand bulbs they last waaaay longer

89 comments