They won't teach you this in Drivers Ed
They won't teach you this in Drivers Ed
You're viewing a single thread.
127 comments
-
Why do it want to do this?
-
you can share your screenshot with the mechanic before you go in for repairs
-
For the record, in 99% of driving scenarios, you probably don't want to press the brake and gas at the same time. For the 1%, you can do something called brake boosting. This is where on turbo cars, you brake to maintain a slower speed, at the same time you press the gas to spool up the turbo, which results in you having little to no turbo lag while racing.
-
You would also do this momentarily (with automatic) when starting from a stop on a steep upward incline, like certain San Francisco street intersections. Get the gas going slightly while holding the brake, then ease off to move forward without rolling back. Because the guy behind you is always too close for comfort.
-
Similar technique would be used for manuals as well. You'd heal-toe on a hill so you don't roll back, same with downshifting and slowing down quickly to make a turn.
-
-
-
[This comment has been deleted by an automated system]
-
In an automatic car. It's a good way to do a burn out provided the engine has enough torque and the breaking is biased to the front.
-
and the breaking is biased to the front.
What does that mean, the front falls off?
-
Nope, jus that the front breaks have more breaking force than the rear. The power from the engine will overwhelm the rear breaks, so for a standing burnout you need the strong front breaks to not get overwhelmed.
-
Oh my, stop it... now the rear can also catch fire?! 🤣
-
-
-
-
127 comments