Santa came late last year, but hard

You're viewing a single thread.

60 comments

Super jealous. Half for storage and half for backup or just going all storage?
- The idea is going for raid5 so that should be around 100TB of storage, minus the OS and apps, etcs. But easily 80TB+ net storage.
  
  With drives that size, you should be talking RAID6, 80TB storage and 40TB checksum.
  Rebuilds will take a long time, and with RAID6 you can at least suffer 2 drives failures and continue to operate fully.
  
  I use a 1tb ssd for the os/apps with my raid5 strictly for storage. Kinda nice if the os needs to be reinstalled or I want to migrate the raid cluster.
  
  but that means you need to give up a bay slot for the system sdd, right?
  
  In my case, I use a PCI card with an m.2 slot for my OS drive. I lose a PCI slot, but I already had a few to spare.
  
  That would probably depend on case, motherboard, and which (if any) pcie slots are occupied.
  
  With that amount of storage I highly recommend RAID6.
  
  I'd do a pool with 2x vdevs, each with three drives in raidz1
  
  That's also a good option but I wouldn't with 6 drivers personally. I have a 12 bay array with two pools of 6 each running raidz2. I've run raid 5 for a long time but have had one drive fail many times and always have mini heart attacks while I wait for the new drive to come in and the rebuild process to happen.
  
  I do this for expansion. I can expand the pool three drives at a time instead of 6. But, I set it up knowing the risk with a single parity drive...and I've acounted for that with backups. 👍

60 comments