Skip Navigation
Selfhosted @lemmy.world
db0 @lemmy.dbzer0.com

The complete guide to building your personal self hosted server for streaming and ad-blocking powered by Plex, Jellyfin, Adguard Home and Docker.

cross-posted from: https://lemmy.dbzer0.com/post/5911320

The complete guide to building your personal self hosted server for streaming and ad-blocking.

Captain's note: This OC was originally posted in reddit but it's quality makes me wants to ensure a copy survices in lemmy as well.

We will setup the following applications in this guide:

  • Docker
  • AdguardHome Adblocker for all your devices
  • Jellyfin/Plex For watching the content you download
  • Qbittorrent Torrent downloader
  • Jackett Torrent indexers provider
  • Flaresolverr For auto solving captcha in some of the indexers
  • Sonarr arr service for automatically downloading TV shows
  • Radarr arr service for movies
  • Readarr arr service for (audio)books
  • lidarr arr service for music
  • Bazarr Automatically downloads subtitles for Sonarr and Radarr
  • Ombi/Overseer For requesting movies and tv shows through Sonarr and Radarr
  • Heimdall Dashboard for all the services so you don't need to remember all the ports

Once you are done, your dashboard will look something like this.

​

Heimdall Dashboard

I started building my setup after reading this guide https://www.reddit.com/r/Piracy/comments/ma1hlm/thecompleteguidetobuildingyourownpersonal/.

Hardware

You don't need powerful hardware to set this up. I use a decade old computer, with the following hardware. Raspberry pi works fine.

​

Hardware

Operating system

I will be using Ubuntu server in this guide. You can select whatever linux distro you prefer.

Download ubuntu server from https://ubuntu.com/download/server. Create a bootable USB drive using rufus or any other software(I prefer ventoy). Plug the usb on your computer, and select the usb drive from the boot menu and install ubuntu server. Follow the steps to install and configure ubuntu, and make sure to check "Install OpenSSH server". Don't install docker during the setup as the snap version is installed.

Once installation finishes you can now reboot and connect to your machine remotely using ssh. 

 undefined
        ssh username@server-ip 
    # username you selected during installation
    # Type ip a to find out the ip address of your server. Will be present against device like **enp4s0** prefixed with 192.168.

Create the directories for audiobooks, books, movies, music and tv.

I keep all my media at /server/media. If you will be using multiple drives you can look up how to mount drives.

We will be using hardlinks so once the torrents are downloaded they are linked to media directory as well as torrents directory without using double storage space. Read up the trash-guides to have a better understanding. 

 undefined
        mkdir ~/server
    mkdir ~/server/media # Media directory
    mkdir ~/server/torrents # Torrents
    
    # Creating the directories for torrents
    cd ~/server/torrents
    mkdir audiobooks  books  incomplete  movies  music  tv 
    
    cd ~/server/media
    mkdir audiobooks  books  movies  music  tv

Installing docker and docker-compose

Docker https://docs.docker.com/engine/install/ubuntu/ 

 undefined
        # install packages to allow apt to use a repository over HTTPS
    sudo apt-get update
    sudo apt-get install \
        apt-transport-https \
        ca-certificates \
        curl \
        gnupg \
        lsb-release
    # Add Docker’s official GPG key:
    curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
    # Setup the repository
    echo \
      "deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu \
      $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
    # Install Docker Engine
    sudo apt-get update
    sudo apt-get install docker-ce docker-ce-cli containerd.io
    # Add user to the docker group to run docker commands without requiring root
    sudo usermod -aG docker $(whoami)

Sign out by typing exit in the console and then ssh back in

Docker compose https://docs.docker.com/compose/install/ 

 undefined
        # Download the current stable release of Docker Compose
    sudo curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
    # Apply executable permissions to the binary
    sudo chmod +x /usr/local/bin/docker-compose

Creating the compose file for Adguard home

First setup Adguard home in a new compose file.

Docker compose uses a yml file. All of the files contain version and services object.

Create a directory for keeping the compose files. 

 undefined
        mkdir ~/server/compose
    mkdir ~/server/compose/adguard-home
    vi ~/server/compose/adguard-home/docker-compose.yml

Save the following content to the docker-compose.yml file. You can see here what each port does. 

 undefined
        version: '3.3'
    services:
        run:
            container_name: adguardhome
            restart: unless-stopped
            volumes:
                - '/home/${USER}/server/configs/adguardhome/workdir:/opt/adguardhome/work'
                - '/home/${USER}/server/configs/adguardhome/confdir:/opt/adguardhome/conf'
            ports:
                - '53:53/tcp'
                - '53:53/udp'
                - '67:67/udp'
                - '68:68/udp'
                - '68:68/tcp'
                - '80:80/tcp'
                - '443:443/tcp'
                - '443:443/udp'
                - '3000:3000/tcp'
            image: adguard/adguardhome

Save the file and start the container using the following command. 

 undefined
        docker-compose up -d

Open up the Adguard home setup on YOUR_SERVER_IP:3000.

Enable the default filter list from filters→DNS blocklist. You can then add custom filters.

Filters

Creating the compose file for media-server

Jackett

Jackett is where you define all your torrent indexers. All the arr apps use the tornzab feed provided by jackett to search torrents.

There is now an arr app called prowlarr that is meant to be the replacement for jackett. But the flaresolverr(used for auto solving captchas) support was added very recently and doesn't work that well as compared to jackett, so I am still sticking with jackett for meantime. You can instead use prowlarr if none of your indexers use captcha. 

 undefined
        jackett:
        container_name: jackett
        image: linuxserver/jackett
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/jackett:/config'
          - '/home/${USER}/server/torrents:/downloads'
        ports:
          - '9117:9117'
        restart: unless-stopped
    prowlarr:
            container_name: prowlarr
        image: 'hotio/prowlarr:testing'
        ports:
          - '9696:9696'
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/prowlarr:/config'
        restart: unless-stopped

Sonarr - TV

Sonarr is a TV show scheduling and searching download program. It will take a list of shows you enjoy, search via Jackett, and add them to the qbittorrent downloads queue. 

 undefined
        sonarr:
        container_name: sonarr
        image: linuxserver/sonarr
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        ports:
          - '8989:8989'
        volumes:
          - '/home/${USER}/server/configs/sonarr:/config'
          - '/home/${USER}/server:/data'
        restart: unless-stopped

Radarr - Movies

Sonarr but for movies. 

 undefined
        radarr:
        container_name: radarr
        image: linuxserver/radarr
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        ports:
          - '7878:7878'
        volumes:
          - '/home/${USER}/server/configs/radarr:/config'
          - '/home/${USER}/server:/data'
        restart: unless-stopped

Lidarr - Music

 undefined
        lidarr:
        container_name: lidarr
        image: ghcr.io/linuxserver/lidarr
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/liadarr:/config'
          - '/home/${USER}/server:/data'
        ports:
          - '8686:8686'
        restart: unless-stopped

Readarr - Books and AudioBooks

 undefined
        # Notice the different port for the audiobook container
    readarr:
        container_name: readarr
        image: 'hotio/readarr:nightly'
        ports:
          - '8787:8787'
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/readarr:/config'
          - '/home/${USER}/server:/data'
        restart: unless-stopped
    
    readarr-audio-books:
        container_name: readarr-audio-books
        image: 'hotio/readarr:nightly'
        ports:
          - '8786:8787'
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/readarr-audio-books:/config'
          - '/home/${USER}/server:/data'
        restart: unless-stopped

Bazarr - Subtitles

 undefined
        bazarr:
        container_name: bazarr
        image: ghcr.io/linuxserver/bazarr
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/bazarr:/config'
          - '/home/${USER}/server:/data'
        ports:
          - '6767:6767'
        restart: unless-stopped

Jellyfin

I personally only use jellyfin because it's completely free. I still have plex installed because overseerr which is used to request movies and tv shows require plex. But that's the only role plex has in my setup.

I will talk about the devices section later on.

For the media volume you only need to provide access to the /data/media directory instead of /data as jellyfin doesn't need to know about the torrents. 

 undefined
        jellyfin:
        container_name: jellyfin
        image: ghcr.io/linuxserver/jellyfin
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        ports:
          - '8096:8096'
        devices:
          - '/dev/dri/renderD128:/dev/dri/renderD128'
          - '/dev/dri/card0:/dev/dri/card0'
        volumes:
          - '/home/${USER}/server/configs/jellyfin:/config'
          - '/home/${USER}/server/media:/data/media'
        restart: unless-stopped
    
    plex:
        container_name: plex
        image: ghcr.io/linuxserver/plex
        ports:
          - '32400:32400'
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
          - VERSION=docker
        volumes:
          - '/home/${USER}/server/configs/plex:/config'
          - '/home/${USER}/server/media:/data/media'
        devices:
          - '/dev/dri/renderD128:/dev/dri/renderD128'
          - '/dev/dri/card0:/dev/dri/card0'
        restart: unless-stopped

Overseer/Ombi - Requesting Movies and TV shows

I use both. You can use ombi only if you don't plan to install plex. 

 undefined
        ombi:
        container_name: ombi
        image: ghcr.io/linuxserver/ombi
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/ombi:/config'
        ports:
          - '3579:3579'
        restart: unless-stopped
    
    overseerr:
        container_name: overseerr
        image: ghcr.io/linuxserver/overseerr
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/overseerr:/config'
        ports:
          - '5055:5055'
        restart: unless-stopped

Qbittorrent - Torrent downloader

I use qflood container. Flood provides a nice UI and this image automatically manages the connection between qbittorrent and flood.

Qbittorrent only needs access to torrent directory, and not the complete data directory. 

 undefined
        qflood:
        container_name: qflood
        image: hotio/qflood
        ports:
          - "8080:8080"
          - "3005:3000"
        environment:
          - PUID=1000
          - PGID=1000
          - UMASK=002
          - TZ=Asia/Kolkata
          - FLOOD_AUTH=false
        volumes:
          - '/home/${USER}/server/configs/qflood:/config'
          - '/home/${USER}/server/torrents:/data/torrents'
        restart: unless-stopped

Heimdall - Dashboard

There are multiple dashboard applications but I use Heimdall. 

 undefined
        heimdall:
        container_name: heimdall
        image: ghcr.io/linuxserver/heimdall
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        volumes:
          - '/home/${USER}/server/configs/heimdall:/config'
        ports:
          - 8090:80
        restart: unless-stopped

Flaresolverr - Solves cloudflare captcha

If your indexers use captcha, you will need flaresolverr for them. 

 undefined
        flaresolverr:
        container_name: flaresolverr
        image: 'ghcr.io/flaresolverr/flaresolverr:latest'
        ports:
          - '8191:8191'
        environment:
          - PUID=1000
          - PGID=1000
          - TZ=Asia/Kolkata
        restart: unless-stopped

Transcoding

As I mentioned in the jellyfin section there is a section in the conmpose file as "devices". It is used for transcoding. If you don't include that section, whenever transcoding happens it will only use CPU. In order to utilise your gpu the devices must be passed on to the container.

https://jellyfin.org/docs/general/administration/hardware-acceleration.html Read up this guide to setup hardware acceleration for your gpu.

Generally, the devices are same for intel gpu transcoding. 

 undefined
        devices:
          - '/dev/dri/renderD128:/dev/dri/renderD128'
          - '/dev/dri/card0:/dev/dri/card0'

To monitor the gpu usage install intel-gpu-tools 

 undefined
        sudo apt install intel-gpu-tools

Now, create a compose file for media server. 

 undefined
        mkdir ~/server/compose/media-server
    vi ~/server/compose/media-server/docker-compose.yml

And copy all the containers you want to use under services. Remember to add the version string just like adguard home compose file.

Configuring the docker stack

Start the containers using the same command we used to start the adguard home container. 

 undefined
        docker-compose up -d

Jackett

Navigate to YOUR_SERVER_IP:9117

Add a few indexers to jackett using the "add indexer" button. You can see the indexers I use in the image below.

​

Indexers

Qbittorrent

Navigate to YOUR_SERVER_IP:8080

The default username is admin and password adminadmin. You can change the user and password by going to Tools → Options → WebUI

Change "Default Save Path" in WebUI section to /data/torrents/ and "Keep incomplete torrents in" to /data/torrents/incomplete/

Create categories by right clicking on sidebar under category. Type category as TV and path as tv. Path needs to be same as the folder you created to store your media. Similarly for movies type Movies as category and path as movies. This will enable to automatically move the media to its correct folder.

Sonarr

Navigate to YOUR_SERVER_IP:8989

  • Under "Download Clients" add qbittorrent. Enter the host as YOUR_SERVER_IP port as **8080, and the username and password you used for qbittorrent. In category type TV (or whatever you selected as category name(not path) on qbittorent). Test the connection and then save.
  • Under indexers, for each indexer you added in Jackett
    • Click on add button
    • Select Torzab
    • Copy the tornzab feed for the indexer from jackett
    • Copy the api key from jackett
    • Select the categories you want
    • Test and save
  • Under general, define the root folder as /data/media/tv

Repeat this process for Radarr, Lidarr and readarr.

Use /data/media/movies as root for Radarr and so on.

The setup for ombi/overseerr is super simple. Just hit the url and follow the on screen instructions.

Bazarr

Navigate to YOUR_SERVER_IP:6767

Go to settings and then sonarr. Enter the host as YOUR_SERVER_IP port as 8989. Copy the api key from sonarr settings→general.

Similarly for radarr, enter the host as YOUR_SERVER_IP port as 7878. Copy the api key from radarr settings→general.

Jellyfin

Go to YOUR_SERVER_IP:8096

  • Add all the libraries by selecting content type and then giving a name for that library. Select the particular library location from /data/media. Repeat this for movies, tv, music, books and audiobooks.
  • Go to dashboard→playback, and enable transcoding by selecting as VAAPI and enter the device as /dev/dri/renderD128

Monitor GPU usage while playing content using 

 undefined
        sudo intel_gpu_top

Heimdall

Navigate to YOUR_SERVER_IP:8090

Setup all the services you use so you don't need to remember the ports like I showed in the first screenshot.

Updating docker images

With docker compose updates are very easy.

  • Navigate to the compose file directory ~/server/compose/media-server.
  • Then docker-compose pull to download the latest images.
  • And finally docker-compose up -d to use the latest images.
  • Remove old images by docker system prune -a

What's next

  • You can setup VPN if torrents are blocked by your ISP/Country. I wanted to keep this guide simple and I don't use VPN for my server, so I have left out the VPN part.
  • You can read about port forwarding to access your server over the internet.

You're viewing a single thread.

53 comments
53 comments